Shoes filled or stained with mud can be very frustrating. Such is the main reason why you have to learn a thing or two on how to get the mud out of shoes so you can remove it right away.
By learning how to get rid of mud from your shoes, it will be easier for you to keep your footwear clean. You can remove the mud right away, thereby preventing it from causing more mess and damage when left for long.
To serve as your guide, some highly effective steps on removing mud from your footwear are included in this article.
What Do You Need to Follow this Tutorial?
- Plastic bag
- Dry paper towel
- Soft toothbrush
- Water and dish detergent mixture
- Washing machine
- Sheets or towels
- Baking soda
Step 1 – Let The Mud Dry
Ensure that your shoe filled with mud is placed inside a plastic bag first. Store it in there until you reach home. Doing so is essential in preventing mud from messing all over your car seats.
Once you reach home, ensure that you let the mud dry before you start cleaning your shoes. Keep in mind that cleaning your shoes right away without waiting for the mud to dry completely can cause the fibers to acquire stains.
To dry the mud, put your shoes in a dry and warm place. If possible, put it outdoors and dry it using direct sunlight. Avoid drying it using the radiator or another source of direct heat as it tends to warp the plastic while also altering its shape.
You can dry your shoe with the help of a fan, as well. Avoid putting it outdoors overnight as it might only cause it to become damp again. Once dry, beat the footwear against a hard surface as it aid in getting rid of the dried dirt.
Dried mud means that it will flake or chip off, making it easier for you to get rid the majority of them from your footwear.
Step 2 – Remove The Inserts And Laces
Before that, though, ensure that you wipe your shoe using a dry paper towel. Avoid using a wet one to prevent it from grinding the mud into the footwear and eventually staining the fiber. The paper towel is useful in getting rid of the remaining powdery and fine dirt.
Once done, you can move on to removing the inserts and shoelaces. You need to remove the laces as doing so makes it possible for you to pull the shoe’s tongue up while also opening the footwear a bit wider. Such is beneficial as it lets you reach even those difficult-to-reach areas.
Also, it is necessary to remove the inserts as any trapped mud under them can cause your footwear to produce a foul smell and mold.
Step 3 – Use A Soft Toothbrush For Scrubbing
Get an unused, soft toothbrush and use it to scrub your footwear. Put a mixture of water and some dish detergent into the brush before using it to scrub the outer and inner parts. Ensure that you reach even those small crevices to get rid of all mud.
To remove dirty water caused by cleaning, wipe off the affected part of the shoe with a dry paper towel or rag. Also, take note that you can use a shoe polishing or nail brush as an alternative to the toothbrush. Scrub the removed inserts, as well, if there are any.
Step 4 – Take Advantage Of Your Washing Machine
Move only to this step if there are still mud and dirt even after you completed the first three steps. Avoid using this method frequently, though. Brushing it with a soft toothbrush is still the best step.
However, for extremely heavy and hard to remove dirt and mud, you might need your washing machine, as it is more powerful and thorough when it comes to cleaning.
If you want to protect your footwear, as well as the machine from potential damage, then consider washing it together with sheets or towels. Also, it is essential to wash only with cold water. Set it at delicate or gentle mode, too.
Furthermore, it is possible for you to wash the inserts in the machine. However, you need to ensure that they are no longer in your footwear.
Step 5 – Allow Your Cleaned Shoe To Dry
Use paper towels or newspapers as stuffing as a means of absorbing dampness. Apply the same principles mentioned in the first step when it comes to drying. The good news is that the shoe will most likely become fully dry within just twelve hours.
Step 6 – Pour Some Baking Soda
Once your shoe is fully dry, a wise tip is to get baking soda and sprinkle some into it. Such is an important step as it works in absorbing any remaining smell. Keep in mind that no matter how clean your shoe is, you won’t still fully enjoy it if it has an unwanted smell.
Sprinkle some baking soda over it then leave it for some time. It should be enough to get rid of the smell from your shoe. However, ensure that your footwear is free from it once you’re ready to wear it.
Banging your shoe upside down can help remove all the sprinkled baking soda. A vacuum, which features a hose attachment, can also help.
How to get the mud out of shoes should never be very confusing and irritating, as there are numerous ways to remove them.
Now that you are aware of the different steps involved in removing mud from shoes, you will no longer worry about how to keep them clean and maintain their excellent condition for a long period.