How to Make Shoes Slip Resistant for Work?

When you are in the workplace, especially if you have a tough and demanding job, having a slip-resistant footwear matters a lot. A shoe with a slip-resistant feature can make you feel secure when you are doing your job as it helps you avoid injuries that might be caused by slipping accidentally.

Fortunately, even if your shoe is not slip-resistant, there is a way for you to make it as such. This article aims to give you some solutions on how to make shoes slip resistant for work or improve their slip-resistant feature.

6 Ways on How to Make Shoes Slip Resistant For Work


1. Scuff the sole

You can make your shoe slip-resistant by scuffing the sole. Aside from improving its ability to resist slips, this tip is also a big help in adding more traction into the footwear. All it takes is to scuff the bottom. What you ought to do is to scrape the sole against any abrasive surface, such as gravel or rough concrete.

It can make the shoe slip-resistant while also boasting of a better grip and traction. It is advisable to do this tip, especially if the shoe is still new as its newness might cause it to be perfectly smooth.

You can expect the sole to obtain slightly more grip once it softens and the minor abrasions and nooks are already worn on them. With that, the properties of the sole will start to have more contact with the floor. The result is better traction and improved slip-resistant ability.

2. Use sandpaper

You can use the sandpaper directly on the sole to abrade it. It is a good solution, especially if you are worried that you might slip while you are still waiting for your new shoes and sole to wear down completely. In this case, an abrasive, such as a sandpaper, can be applied directly to it.

The process is simple – just remove your shoe then look for the smoothest section of its sole so you can rub the sandpaper to it. Continue rubbing until the area has a more textured and rougher feel. It would be best to use a sandpaper with a fairly coarse texture. A wise tip is to utilize a 50-grit paper.

However, take note that the sandpaper may not work on all types of sole. There are certain soles that are not suitable to it, such as those that have a natural cardboard-like texture, so you have to figure out first whether the sole of your footwear can respond to this solution well.

3. Take advantage a nail file

As an alternative to sandpaper, you can also utilize a nail file or any other similar tool. There is no need to worry too much about how to use it as you will just have to follow the procedures involved when using a sandpaper. Just use it in scuffing the flat and smooth parts of the footwear, especially those that are exposed to the floor.

Doing such can help add texture to the areas. If possible, use a metal nail fail as such material is known for being the most convenient and durable to use when it comes to this task. You can also use an emery board as an alternative. Just like when you are using a sandpaper, a coarser nail file also works better than the others.

4. Use a spray or a grip pad

Otherwise referred to as a spray-on coating, a spray or grip pad is also a useful tool that you can use if you want to find a solution on how to make shoes slip resistant for work. It should be noted that this tool comes in different types, so it is advisable for you to look for one that perfectly suits your footwear.

You can find grip pads and traction sprays – both of which perform similar functions and are available for sale in stores. However, take note that the sprays are more expensive than the grip pads. The use of a spray or grip pad is ideal, especially for the extremely worn-out sole.

Such case requires you to add a material at the bottom part of the shoe, which aids in increasing its grip. The best way to handle it is to put shoe pads, which is made especially for that function, at the sole. Such pads are textured that can be attached to the sole material using an adhesive.

However, be aware that the use of adhesive might cause the shoes to have a bit of a sticky feel after removing the pads. Eventually, such uncomfortable feeling will be removed over time.

5. Take advantage of an ice grip

If you are not fond of doing things on your own, then you can just invest in ice grips and slip it on your footwear. The ice grips are extremely useful in adding tread to the shoe without risking its integrity and durability.

The good thing about an ice grip is that it is available in different colors, so you can pick one which you like. In addition, it is easy for you to take it on and off while also adding more style to the footwear.

6. Make use of a puff paint

Another solution is the puff paint, also known as a dimensional fabric paint. You can often find this kind of paint in products usually used for children’s arts and crafts. One reason why it is a good solution is that it tends to have a textured and rough quality once it dries. The use of it, therefore, improves the grip and traction of the footwear’s bottom.

Just add a thin coating of the paint to the sole then leave it for several hours or until it dries. Make sure to reapply it regularly to maximize its effectiveness. The good thing about the use of a puff paint is that it gives you the opportunity to add a design to your footwear, making it more unique and creative.


How to make shoes slip resistant for work is now easy with the solutions mentioned here. Fortunately, all the tips and solutions in this article are easy to do at home. There is no need to contact a professional or purchase an extremely expensive product to make your shoes slip-resistant.

Similar Posts

Leave a Reply

Your email address will not be published.